QGroundControl AQ version 1.1.0.a3 -- talking Windows test

[bluuu]

not the same there are different date

[afernan]

Max, Peter:
very nice work in this new feature!!!. It´s really helpfull.

Some comments:
1.- in the panel "AQ Log Export Options",the "Trigger indicator" needs to be set to:

AUX1 = Channel 6
AUX2 = Channel 7
Then, it works how it should (correctly)

Normally should be
CHANNEL5 AUX1 (-670=manual 0=PH=center 670 = AUTO)
CHANNEL6 AUX2 (-670=RTL 0=Normal=center 670=set home)

(In fact, if you tick "radio-channels 1-8" and create a csv file, it´s correct there).

2.- When generating a kml flie from a LOG with different modes, are created different tracks (named "001-AQL-1,2,etc" but they are printed in one single track in G.Earth

To get different tracks/colors I think is only needed to create separated <Placemark> each one with different name/color

Attached is a kml file generated with this QGC, triggered only for AUTO modes (Trigger_Channel = 6, channel_value > 250) and then added manually one different <Placemark> separator between tracks. Result is shown in the immage attached.

Angel

[monkey1]

qgroundcontrol_aq-Win32-1.1.0.a3 ESC32 settings cannot store PWM min Period value changed. Using back to 1.0.5 can save the value.

[Max]

[Max]

[Andrej]

How to write something to AQ board from GCS?? Every attempt cause abnormal termination of GCS.
Two computers with Win7 and the same problem with versions 1.1.1 and 1.0.5.