First at all hi all. At the end I found some time to start playing with the AQ.
I normally use a windows xp virtual machine for all my other boards setups.
Downloaded v 6.6 r19 hex and flashed corectly with mavlink with 1.02 widget
My problem is that I cannot get connection to the board with mavlink, I always see many people with similar problems with other boards I use, that end to simply be port settings, I really feel ashame but need your help as after an entire afternoon im still stuck. Board does log so I suppose I could start with the freezings tomorow but need to sort this out somehow.
I have used viacopter usb-serial for flashing, with rx-tx tx-rx gnd-gnd, com port is set at 115200,8-1 and no flow control. I have also tried other serial to usb adapters and another computer with win7 on it but had no luck.
Even disconnecting the aq I always get a connected message in mavlink but have no access to any of the aq data.
Please take a look to the attached screenshots ...HELPPP....
Many thanks in advance...