Hi,
I have some question about firmware, flashing, hud, calibration procedure.
1.How can i readout the version of the actual install firmware on the AQ6 flightcontroller?
2.If i upgrading von firmeware of the AQ6 , will be reseting the user-parameters which i setting during the
calibration procudure for instance?
3.Can i mix static calibration file which made with the firmware 6.5 and dynamic calibration file which made with
the firmware version 6.6 ? Are the log-files compatible?
4. In this post
chris24g report an bug in the HUD display.
It seems that i also have this error. I using the the actual firmware 6.6 and the groundcontrol 1.0.1 alpha RC18.
Is the bug still existing or use i the wrong version of the groundcontrol program?
5. At the moment i do not execute the calibration procedure and the adjustments of the corresponding values.
if i install the AQ6 horizontal and vertical on my desk the HUD display in the groundcontrol show allways an
non-vertical and non-horizontal alignment. Are these variations of an non-calibrated-imu normal?
Chris