1.
The battery voltage is 14.6, but remain battery charge level is 100%.
my low battery setting : stage 1 warning 3.3; stage2 warning 3.1.
2.
It is strange that it did not beep as usual(because it disarmed)after I power on the AQ and ESC, and I armed the AQ,but the motor didnot rotate.
I must try to power on the AQ and ESC again until it beep, then the motor could rotate normally after armed.
My airframe X450
AQ hw6.1 dimu1.1 firm7.0
battery 4s
Motor: sunnysky 3508 580KV
ESC: Hobbywing Platinum-30A