AQ can't save waypoint and display position realtime

[EX_TRUE]

Greetings.

1.I set mission waypoint to AQ and refresh onboard waypoint, I can see the waypoint I set. But after I power on AQ again, the mission waypoint missed.(Ps I have tried Write Flash button, but failed)

2.The QgroundControl can't update the Copter's realtime positon on map, though it did flying according to the mission waypoints actually.

3.The battery charge level didn't display voltage of battery real time, and cause my copter crash to the ground.

4. The QGroundControl version1.5.0 can't cache map for offline use successfully.In the end, I used version 1.4.0.

By the way, the AQ is real wonderful.

Best regards.

[kinderkram]

It doesn´t save the WPs for a reboot.
But you can save them into a text file anytime and re-load them after powering the FC. Buttons "Save/Load WPs".

Which maps are you using? You can switch between map types via the "Options" button in the lower right corner of the map window.

[joebar.rc]

[EX_TRUE]

[EX_TRUE]

[chschmid]

Does this info here help?



Cheers
Christof

[EX_TRUE]

[chschmid]

Ok, what about here:

[Max]

There's no onboard (SD card) mission waypoints storage in the stock firmware, sorry. The "WP To/From SD" buttons in QGC were removed a while ago (the ones in Christof's screenshot should be for saving to local file on PC). Hopefully we can implement some of Menno's changes into the stock firmware soon, after the next beta/stable release.

-Max

[EX_TRUE]