Greetings
I have compiled the source code on repository, and build complete.
But after I download autoquad.hex to AQ6.1a hardware and reset, all led is off except the Power LED, which indicate the onboard program didn't run successfully.
1.the CrossStudio version is 3.3 ,the st firmlib is STM32F4xx_DSP_StdPeriph_Lib_V1.3.0
2.I modfied the aq.h
#ifndef BOARD_REVISION
#define BOARD_REVISION 1
#endif
add #define DIMU_VERSION 11
3. the Qroundcontrol could not connet the AQ successfully.
4. I have compiled the solution of trunk and the 6.9 in branches both, but all failed to run after download completed.
5. my thumb setting is THUMB RELEASE.
Many thanks for your help.