So i needed much longer than i thought weather and studys are taking the time :-/
i finished now all of the things your guys told me (i hope i made it right).
Test 1 Normal + Record
A=2
B=7
C=8
D=10
the motor D is not working (hanging after a time) when iam flying i was recording everything i hope you can read something out of it i tryed but i dont really understand what should be wrong with the signal.
Link for the log file:
http://www.file-upload.net/download-981 ... L.LOG.htmlTest 2 D motor switching with the motor under him (iam using a X octoframe with all motors on it but for the tests iam just using him as quadro that i can replace the motors easier with the motor under them if something should not work)
The motor D* is not working (hanging after a time)
So like u can see in the picture i tryed both ways and in both cases the motor on the top is not working the motor on the ground is not connected with the fc
Test 3 changing the port
D was on 10 i switch it to 14 ==> still not working (hanging after a time)
Test 4 changing the port
D was on 14 i switched it on 12 ==> still not working (hanging after a time)
Test 5 Checking if the ESC are programmed in a other way than the others
I checked all of them all of them are the same way programmed
Timing: 30°
Brake: off
cut off type accutype: slow down / LiPo
cut off voltage: 2.4 /3.1
Cells: 12
Act. Freewa. Gov. Mode: Freew. on / Gov off
Start up Speed : Heli middle
PMW Frequenz : 10 kHz
Start up Speed: Auto 1-32%
All are programmed the same way
Test 6 EM noise
I made the cable of motor D out of the arm away from the main powercable
nothign changed still the same problem the motor is hanging after some sec flying
The only thing i didnt do until now is calling the company of the ESC to ask if they have a problem with the PWM signal you told me aout.
i hope someone can help me by giving me a new idea...
i hope the problem is not that the motor and the ESC are not in harmony...i cant really understand because the other arms are working and why should be the problem always on the same arm and not on the other arms?
Thank u very much for reading my post
Marco