Hello together,
my name is Marco and iam building now since a year on my copter. Many times i got help by friendly people from the FPV Community Forum. But it looks like no one really has a idea about my newst problem. I hope maybe in this forum someone can give me a tip what the problem could be. Maybe you already recognized that my english isnt that good...i hope its still good enough to explain my problem.
I have builded a octocopter with the u8 135kv motors in combination with YGE 60HV ESC. As an fc iam using an AQ6.
The problem is that when iam flying the copter one motor (its always the same motor) is suddenly giving up and stops directly turning. It looks like he is hanging between two poles. If i go down with the throttle and and than high again everything is turning normaly again until suddenly its happening again. Na i see my english really sucks...em this video should explain the situation much better than my words.
https://www.youtube.com/watch?v=sL0fudvFKE0
I already tryed:
resolder on every joint
switching/replacing the ESC of and working motor with the one who is not working
replacing the motor
using a other port on the AQ6
calling the YEG company
and still always the same ARM of the copter is not working. It doesnt matter which motor is hanging on this arm the one who is there is giving up. Ah and i was checking every motor by making them on the trottle channel if they are working...they are...all of them are working perfect when iam making the directly on the channel.
I really hope one of you can help me anyway thanks for trying by reading this post
Marco