This is a bit strange, so I loaded Mennos r429 then followed by my parameter file and everything was fine. The AQ armed and flew normally. Then I changed the FW to the experimental build r431 to see if the default PIDS had changed then back again to the R429. After loading my parameter file I tried arming the AQ but it wouldn't arm. I plugged it back into GCS v1.5 and all parameters had loaded correctly. I tried arming it whilst plugged in and GCS verbalizes armed, flying and disarmed but the motors don't turn or the ESC's chime. I checked all connections but they are fine. If I reflash the FW and don't load my parameter file but select the correct radio, frame type and CAN then it will arm. But the moment I load my parameter file it won't.
I haven't changed anything with the file and find it strange that it was working beforehand but now not.
Any suggestions would be much appreciated
James
EDIT: Thanks to Max and abugsworstnightmare, this problem is now fixed. Changing CONFIG Version in GCS to 129 fixed the issue