Hi,
i have a problem to get any Parameter from the AQ6!
But from the begining: I'm startet with my first AQ6 (with DIMU) and after the first FW-Update (latest from ftp) I cant get the Parameter anymore. It doesnt matter if i use the DIMU- or the AIMU-FW (without DIMU-board)!
First i thought i had a connectionproblem, but i receive livedata (in primary flight display) from the AQ.
So i tried to find out from wich version die parameters doesnt work: (hex from ftp)
r378 AIMU: Parameter: works; primary flight display: looks fine
r378 DIMU: Parameter: works; primary flight display: values flipping crazy
r395 and later AIMU/DIMU: Parameter: doesnt work ; primary flight display: looks fine
I also tried to make factory reset... after that same problem (params.txt on SD, with #define CONFIG_VERSION=0)
So one of the changes between these revisions has the effect, that i cant get the parameters.
Anyone knows something about that??
thanks for your help
ps: For the connection i use the USB-UART-interface from Flyduino (CP2102). QGS 1.3, 1.4, 1.5A