failed to upgrade firmware

News, Setup, Compiling, Flashing, Development

failed to upgrade firmware

Postby jet » Wed May 21, 2014 12:49 pm

Hi, all.
Some days ago, I succeeded to upgrade my AQ6 with v6.7 firmware.
Today, I wanted to upgrade v7.0 firmware, since I plugged in DIMU v1.1.
However, QGC showed "Failed to get init ACK from device." (Fig. 1)
I had tried two different AQ6 boards.
I got the identical message.
How to solve this problem?
Thanks for help.
Attachments
1.jpg
1.jpg (40.06 KiB) Viewed 6460 times
jet
 
Posts: 69
Joined: Wed Mar 05, 2014 2:23 am

Re: failed to upgrade firmware

Postby SuperSharpShooter » Wed May 21, 2014 12:57 pm

I think you just need to set the speed to 57600.
-Glenn
SuperSharpShooter
 
Posts: 276
Joined: Sat Jan 12, 2013 9:44 pm

Re: failed to upgrade firmware

Postby bluuu » Wed May 21, 2014 1:12 pm

there could be 115200 but you must remember about boot jumper
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: failed to upgrade firmware

Postby jet » Thu May 22, 2014 1:27 am

Thanks for the reply.
Yes, I made a mistake.
I forgot to plug in a boot jumper.
Now, it's ok.
Thanks again.
jet
 
Posts: 69
Joined: Wed Mar 05, 2014 2:23 am


Return to AQ Firmware

Who is online

Users browsing this forum: No registered users and 14 guests