Hi,
I just generated the three static logfiles which look very good, and wanted to start the calculation of the params, as for the first 3 steps only the static logfiles are used, but I get the following error:
"/home/duke40/qgroundcontrol-build-desktop-Qt_4_8_2_in_PATH__System__Release/release/aq/bin/cal" --rate "/home/duke40/qgroundcontrol-build-desktop-Qt_4_8_2_in_PATH__System__Release/006-AQL.LOG" "/home/duke40/qgroundcontrol-build-desktop-Qt_4_8_2_in_PATH__System__Release/007-AQL.LOG" "/home/duke40/qgroundcontrol-build-desktop-Qt_4_8_2_in_PATH__System__Release/008-AQL.LOG" :
logger: checksum error
logger: checksum error
logger: checksum error
logger: checksum error
Is this due to the missing dynamic log? Or is this due to some other issue? I use QGroundControl v1.4 BETA 1 (140.02) for Linux. The FW on the AQ is r380 fro DIMU. and I have a DIMU 1.1 attached to the AQ.