(moved this from the wrong thread, sorry):
Hello,
I am struggling to flash a new AQ6 board with DIMU 1.1 already mounted using a Flyduino USB UART Adapter CP2021
On my OSX qgroundcontrol I receive the following error:
On my Windows 8.1 machine I receive this error:
OK, here is what I tried to avoid the problem:
- Tried method 2 (First Click “Flash firmware” button, only now reset AQ in BOOT Mode"
- Tried different hex files
- Tried many times
- I have checked the connections with the voltmeter, looks fine.
- I removed the jumper J4 at the moment the flash procedure started.
Finally, I gave up.
Comments appreciated.
Cheers,
Stefan
stefannn
Posts: 2
Joined: Sat Aug 30, 2014 2:32 pm