Problem loading firmware for the first time

[vAkUuM]

Joerg!
Thank you very much! your hint - hit RESET, helps me! Now I flash it by 6.7 BETA and will start to do everything step by step. It is not so easy but interesting. Thank you very much again, GURU

[aBUGSworstnightmare]

Hi vAkUuM,

have a look at the FTP server too: ftp://ftp.autoquad.org/3/334693_22529 (connect as guest if you were asked for a password (i.e. wen you're on OS X).

The folder aq-firmware has the latest (experimental) versions available to date - and also the latest stable ones.

Joerg

[stefannn]

(moved this from the wrong thread, sorry):

Hello,

I am struggling to flash a new AQ6 board with DIMU 1.1 already mounted using a Flyduino USB UART Adapter CP2021

On my OSX qgroundcontrol I receive the following error:




On my Windows 8.1 machine I receive this error:




OK, here is what I tried to avoid the problem:
- Tried method 2 (First Click “Flash firmware” button, only now reset AQ in BOOT Mode"
- Tried different hex files
- Tried many times
- I have checked the connections with the voltmeter, looks fine.
- I removed the jumper J4 at the moment the flash procedure started.

Finally, I gave up.

Comments appreciated.

Cheers,
Stefan
stefannn

Posts: 2
Joined: Sat Aug 30, 2014 2:32 pm