Compile using MAKEFILE - HowTo for rookies

[flyrobot]

Hi Max,

Yes, lib and build i put in same level.

Let me check again tonight if its still fail, Im going to start again from beginning with CW 2.x.x.

Thank you for your help.

John

[flyrobot]

Hi Max,

I have tried :
1. AQLIB_PATH using : .. or ../ or ../../ and ../../../ all possibility, resulting same error.
2. installed two machine with CW 3.0 and CW2.3.2 result same error.
3. to make sure no corrupted files, I tried to compile using CW3.0 (evaluation lic) its no problem all success.

yes, on the C:/CW/lib and also on CW intallation (C:/Program Files/Rowley Associates Limited/CrossWorks for ARM 2.3/lib)
Should I remove one on C:/CW/lib ? Let me try

STM32F40_41xxx.vec and also STM32_Startup.s & STM32F2XX.vec already on STM32 folder

Many Thanks.

John

[flyrobot]

Hi Max,

Finally, It works. Many many thanks.
Im using CW2.3.2 and and you right, Im using AQLIB_PATH : ..
And one more thing I made mistake is : a lot of files corrupted when i put on dropbox. I supposed to wait a couple of hour.

Again, Thank you Max. I really appreciate your help.'

John

[phynix]

Hi, even so I know a roughly how to use C/C++, I am a real noob concerning programming of MCUs (besides Arduino which doesn't count). But I want/need to get into it. Ok, before I start with all this: Is there a legal and practical (for noobs like me ) way of compiling the firmeware of both, AQ and esc32 without using Crossworks? If so, does it make any sens when not using Linux?

Thank you very much,
Sören

[kingwong]