by plexus » Sun Dec 15, 2013 12:52 pm
Thanks Skew
First test with all propellers:
at any position of the throttle the hexa stay leveled it is very hard to change his position wth the arm. Good.
Seconf test one propeller missing:
exactly as you say: tx 100% throttle
(all motors will be at full 100% there will be no leveling resistance from AQ it will not try to slow the motors on high angle side to level ) .YES it is that.
Third test: 80% throttle
The hexa try to leveled but not enough.
With one propeller out, at 80% of throttle, holded in the arm, the hexa want to go back (the side where the prop is missing. When I tilt the hexa with the stick, it dont try to leveled. The stick has no action and the hexa flip.
In the QGC I tried the predefined values of the tilt and also upper values , 75 and 90. There no changes in the results.
After all these test, my conclusion is AQ6 cannot fly with a propeller missing.
I am afraid to carry a camera in these conditions.
I wrote the probleme to Bill (BN999).
I will be very happy if it was possible to see a video take off and flight with one propeller out.
Thanks a lot
Alain