Needing help compiling Firmware from repository

[DUKE40]

Hi,

I am trying to compile the firmware from the google code, but get two errors (for the start):
#error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"
system_stm32f4xx.h: Datei oder Verzeichnis nicht gefunden

I assume this is a beginner error, and can be easily solved. But I do not know which one of the STM32F4xx devices is used by the AQ.

Any help would be appreciated.

[DUKE40]

Hi,

reading again the documentation I was able to solve the problems step by step.
The last issue I have is than it seems I have compiled with the DEBUG option, as the .hex file is in the directory THUMB Debug, instead of THUMB Release.
I just need to find out how to remove the DEBUG option.

[DUKE40]

I found this option as well.
Now I will have to see if my .hex is working as expected. This might be a little bit more stressful.

[kinderkram]

Glad you found this.

[DUKE40]

Yes, was a bit late yesterday after a hard day of work. I did not see everything on the first sight.
But finally everything is fine.