Acro mode! And more...

News, Setup, Compiling, Flashing, Development

Re: Acro mode! And more...

Postby Patscherpofel » Mon Dec 12, 2016 8:05 pm

Max wrote:For the last item, to enable sending the RC channel message you'll need to manually change the CONFIG_FLAGS parameter (until I update QGC). Just take the current value and add 64 to it. So:

Code: Select all
CONFIG_FLAGS = CONFIG_FLAGS + 64

Example using default value:
Code: Select all
CONFIG_FLAGS = 16 + 64 = 80

(You can also OR the values together if you really want to get technical about it :geek: )




Sorry for the dumb question, but I dont understand where I do these changes?
do I have to compile my own fw for this?
Patscherpofel
 
Posts: 91
Joined: Fri Feb 12, 2016 10:03 pm

Re: Acro mode! And more...

Postby Max » Wed Jan 11, 2017 8:08 am

Sorry I missed this one earlier... The CONFIG_FLAGS can be changed from QGC "Onboard Parameters" view by directly editing the line and then saving the changes. However QGC may reset this value when saving changes "normally" (from the main config UI), so it will need to be updated each time.

I've already added this option to the QGC code (GitHub) but it's waiting on the next release -- perhaps Angel's version already has it in there: viewtopic.php?f=23&t=4910#p37484

-Max
Max
 
Posts: 2814
Joined: Mon Aug 13, 2012 9:45 pm
Location: Near Ithaca, NY, USA

Re: Acro mode! And more...

Postby jason0999 » Wed Jan 11, 2017 3:28 pm

Hi Max

Do you have any time-frame as to when you will be releasing the latest firmware version and QGC

Regards,

Jason.
jason0999
 
Posts: 6
Joined: Tue Mar 01, 2016 10:48 am

Re: Acro mode! And more...

Postby Simson » Mon Feb 13, 2017 2:15 pm

Hi Max, any news regarding a new QGC release?
I would like to test the RSSI MavLink telemetry message but with the current release it's not easy to manage. Thanks a lot!
Cheers, Harry
Simson
 
Posts: 59
Joined: Tue Jan 20, 2015 1:07 pm

Previous

Return to AQ Firmware

Who is online

Users browsing this forum: No registered users and 3 guests