Re: Let's show it off!
Posted:
Fri Apr 26, 2013 8:08 pm
by teramax
thermoformable CF? Sounds interresting, please share your knowledge!
Re: Let's show it off!
Posted:
Fri Apr 26, 2013 10:23 pm
by JussiH
Thanks, guys. A LOT of hours went into it, there is 78 individually milled G10 parts in the body and LG alone. Most of them 12*6mm..so its a jigsaw to put together. But it looks way cool and flys amazingly good already. As usual, its not my design-work, but the work of SebastianJ.
Steve, It started out as a personal fun project for the winter, but I actually see the potential with a rollcage like the "window-flyer" for this to become an inspection vehicle that could be "pinned" to a surface or flown into very tight spaces.
Bill, it was something a sign-making friend of ours showed us. Its basically a normal CF plate that can be milled, and then it can be heated up and formed, and when it cools it hardens finally. I think its pretty expensive stuff and it has a shelf-life of 12 months. I will call him and get a brandname for it.
Re: Let's show it off!
Posted:
Sat Apr 27, 2013 3:05 am
by chschmid
Here is a link for the good stuff:
Best
Christof
Re: Let's show it off!
Posted:
Fri Jun 07, 2013 8:27 am
by flyrobot
[quote="bluuu"]
Very nice hexa and very accurate.
Re: Let's show it off!
Posted:
Fri Jun 07, 2013 9:54 pm
by leopold1
Bluuu, very nice!
Care to share your setup, PID's and mission?
Re: Let's show it off!
Posted:
Fri Jun 07, 2013 11:28 pm
by bluuu
thx for instructions of youtube button
I trying many combination but not that
Next vids will be embedded.