AQ6 spacewalk 550 custom quad for sale (SOLD)
Posted: Sun Mar 13, 2016 12:14 amLong time, AQers!
This is a good chance of buying new ESC32s and AQ for a bargain...
Detailed items of this custom built that you can very easily un-assemble and use separately:
1 x Autoquad 6 with Digital IMU - all bough assembled.
1 x assembled spacewalk 550 frame (you can easily get rid off this if you don't want it)
4 x Autoquad ESC32
4 x Flyduino X-Motors 2216 900KV
1 x - GPS antenna + GPS shield
Wiring and other accessories as you can see in the pics...
Condition:
I'd say New/un-used. There was just one maiden flight that lasted few minutes... That's all.
Reason:
Just moving on. I'm very busy with my PhD and have no time whatsoever for this. The machine has been laying in my cupboard for 2+ years now and I haven't got the time to touch it.
What's needed:
Beside the obvious RC, LiPos..etc You might need to calibrate ESC32s for a better motors/props combo. I used parameters of equivalent motors (T-Motors 900 Kv) but I'm sure this can be further tuned. I bought these items on the promise that I will receive the calibration parameters immediately - oh well, I'm sure they're out there somewhere by now! Contact Jussi
.
Any questions let me know.
I'm trying to locate the invoices so I can make an estimated selling price, but meanwhile, I welcome any offers!
This is a good chance of buying new ESC32s and AQ for a bargain...
Detailed items of this custom built that you can very easily un-assemble and use separately:
1 x Autoquad 6 with Digital IMU - all bough assembled.
1 x assembled spacewalk 550 frame (you can easily get rid off this if you don't want it)
4 x Autoquad ESC32
4 x Flyduino X-Motors 2216 900KV
1 x - GPS antenna + GPS shield
Wiring and other accessories as you can see in the pics...
Condition:
I'd say New/un-used. There was just one maiden flight that lasted few minutes... That's all.
Reason:
Just moving on. I'm very busy with my PhD and have no time whatsoever for this. The machine has been laying in my cupboard for 2+ years now and I haven't got the time to touch it.
What's needed:
Beside the obvious RC, LiPos..etc You might need to calibrate ESC32s for a better motors/props combo. I used parameters of equivalent motors (T-Motors 900 Kv) but I'm sure this can be further tuned. I bought these items on the promise that I will receive the calibration parameters immediately - oh well, I'm sure they're out there somewhere by now! Contact Jussi
.Any questions let me know.
I'm trying to locate the invoices so I can make an estimated selling price, but meanwhile, I welcome any offers!