Searching: ready soldered Kisssys Expansion board

Looking for something? Want to offer something?

Re: Searching: ready soldered Kisssys Expansion board

Postby Patnet » Sat Jan 31, 2015 12:26 am

JussiH wrote:
...add the voltage sense wires from the main battery to the ADC pads to get voltage monitoring...


So, jsut to clarify, 11.1V from a 3S is OK on he ADC pads?
Patnet
 
Posts: 138
Joined: Thu Jan 29, 2015 10:24 pm

Re: Searching: ready soldered Kisssys Expansion board

Postby LPR » Sat Jan 31, 2015 2:21 am

Pat

I searched the AQ Wiki for ADC and found this.

Read it carefully.

http://autoquad.org/wiki/wiki/m4-microc ... onitoring/

Larry
LPR
 
Posts: 1323
Joined: Tue Jun 26, 2012 1:29 pm
Location: MN, USA

Re: Searching: ready soldered Kisssys Expansion board

Postby Patnet » Sat Jan 31, 2015 3:21 am

LPR wrote:Pat

I searched the AQ Wiki for ADC and found this.

Read it carefully.

http://autoquad.org/wiki/wiki/m4-microc ... onitoring/

Larry


Hi, I have read it. Does "main pack voltage" mean the 3S battery at 11.1 V?
Patnet
 
Posts: 138
Joined: Thu Jan 29, 2015 10:24 pm

Re: Searching: ready soldered Kisssys Expansion board

Postby kinderkram » Sat Jan 31, 2015 6:44 am

Supply main pack voltage on to this port to monitor up to 6S lipo voltages. (6s = 22.2V)
http://autoquad.org/wiki/wiki/m4-microc ... Monitoring
kinderkram
 
Posts: 2911
Joined: Fri Jun 22, 2012 7:47 am

Re: Searching: ready soldered Kisssys Expansion board

Postby Patnet » Sat Jan 31, 2015 6:30 pm

kinderkram wrote:[i]Supply main pack voltage on to this port to monitor...


Thanks, can I suggest that in the next wiki, the more common term "battery" is used, and not "main pack." It's not common usage and the adjective "main" suggests a principal pack and a secondary pack, which there isn't, the 1S isn't used at all.

Also it might be clearer to mention that you're not talking about the balancing leads, which are also used to measure voltage in some situations, like in a charger. Thanks.
Patnet
 
Posts: 138
Joined: Thu Jan 29, 2015 10:24 pm

Re: Searching: ready soldered Kisssys Expansion board

Postby kinderkram » Sat Jan 31, 2015 6:44 pm

Changed "main pack" to "battery".
kinderkram
 
Posts: 2911
Joined: Fri Jun 22, 2012 7:47 am

Re: Searching: ready soldered Kisssys Expansion board

Postby Patnet » Sat Jan 31, 2015 7:03 pm

kinderkram wrote:Changed "main pack" to "battery".


Looks good.

Thanks to you all for helping me.
Patnet
 
Posts: 138
Joined: Thu Jan 29, 2015 10:24 pm

Re: Searching: ready soldered Kisssys Expansion board

Postby axelnied » Fri Feb 13, 2015 8:42 pm

JussiH wrote:At the moment, the only option available is the kit - But I will try and see if I can make some here.

An updated production version is in progress, but gonna take a 2-3 weeks, I think.

If all goes well, I will make an expander for small BLDC copters available soon

It sports a Recom 5V supply, 3.3V supply, uSD-card, Optional BT module, UART, CAN and voltage sensor output - and it brings out the M5 thru M8 to 5V powered Servo connectors, same style as AQ6. Main input is reverse voltage protected

Footprint is 37*37mm with 30*30 M3 mounting holes. The holes next to the expansion connectors is for M2 insert nuts, so that the M4 can be secured firmly in place.

Sorry, but this crappy cell photo is all I have right now. The first production prototypes are underway from factory now.

Jussi,

Any update on the ETA for the N4's?
axelnied
 
Posts: 261
Joined: Wed Jul 04, 2012 5:51 pm
Location: San Diego, CA, USA

Re: Searching: ready soldered Kisssys Expansion board

Postby JussiH » Fri Feb 13, 2015 10:15 pm

Actually, I just got them in yesterday, and have been testing all day with good results - working as expected.

Its flying a Leora with Kiss18, MT1306 very well on PID. Working on a Quatos setup for it now. When ready, I will publish it as a reference build:

DSC02484.JPG


I need a few days to finish the documentation and get some Recoms in, but I expect them to become available beginning of next week.

Here is a few crappy photos from my desk...:

DSC02475.JPG


DSC02476.JPG


DSC02483.JPG
JussiH
 
Posts: 2103
Joined: Thu Jun 21, 2012 9:25 pm

Re: Searching: ready soldered Kisssys Expansion board

Postby Max » Fri Feb 13, 2015 10:40 pm

Nice Jussi, looks like that's finally the answer to my "Leora dilemma." :) I think Tilman was worried I'm going to butcher the pretty frame... ;)

-Max
Max
 
Posts: 2814
Joined: Mon Aug 13, 2012 9:45 pm
Location: Near Ithaca, NY, USA

PreviousNext

Return to MarketPlace

Who is online

Users browsing this forum: No registered users and 1 guest