Hello,
i'm missing the Buttons "WP from SD" and "WP to SD" in the QGC. In the Doku the two Buttons exists:
http://autoquad.org/wiki/wiki/configuri ... t/?lang=en (Store on µSD)
But in the QGC 1.5.0 i cant find them. What happend? Is this Function hidden or deleted?
regards
Florian
QGC: Missing the "WP to SD" and WP from SD
4 posts
• Page 1 of 1
QGC: Missing the "WP to SD" and WP from SD
by Florian75 » Mon Mar 02, 2015 2:47 pm
- Florian75
- Posts: 48
- Joined: Wed Oct 09, 2013 7:35 am
Re: QGC: Missing the "WP to SD" and WP from SD
by Max » Mon Mar 02, 2015 3:17 pm
The function never existed in the AQ firmware, only the buttons in QGC did (not really sure why they were there or why it is documented!). So they were commented out for now. Looks like the wiki needs the same.
-Max
-Max
- Max
- Posts: 2814
- Joined: Mon Aug 13, 2012 9:45 pm
- Location: Near Ithaca, NY, USA
Re: QGC: Missing the "WP to SD" and WP from SD
by kinderkram » Mon Mar 02, 2015 3:18 pm
1. Q: Have you opend the "Mission Plan" from the Tool Widgets?
2. Q: Why do you still use 1.5?
The onboard waypoints can only be stored/retrieved when the AQ is connected.
2. Q: Why do you still use 1.5?
The onboard waypoints can only be stored/retrieved when the AQ is connected.
- kinderkram
- Posts: 2911
- Joined: Fri Jun 22, 2012 7:47 am
Re: QGC: Missing the "WP to SD" and WP from SD
by Florian75 » Mon Mar 02, 2015 4:29 pm
- Florian75
- Posts: 48
- Joined: Wed Oct 09, 2013 7:35 am
4 posts
• Page 1 of 1
Return to AutoQuad 6 Flight Controller
Who is online
Users browsing this forum: No registered users and 13 guests