Mag calib does not run - help needed
Posted: Thu Jan 22, 2015 11:20 am
Hey guys, have a new problem with my AQ6.
Now that i´m close to finish, i tried to do mag calib and TARE, but the mag calib does not start - and i have no clue why
Sticks are proper adjusted to -700 - 0 - 700 and Throttle to 0 - 70 - 1400 , both switches set to normal flight mode. Arm / disarm works, all motors are running, but i can´t start the calibration, neither moving one stick first nor moving both simultaniously. (Thr.: down-left / Pitch : Up-left)
Any advice how to fix the problem ?
Next question : for TARE, must a notebook be attached by FTDI or does even BT work with smartphone to control that it is leveling ?
Now that i´m close to finish, i tried to do mag calib and TARE, but the mag calib does not start - and i have no clue why
Sticks are proper adjusted to -700 - 0 - 700 and Throttle to 0 - 70 - 1400 , both switches set to normal flight mode. Arm / disarm works, all motors are running, but i can´t start the calibration, neither moving one stick first nor moving both simultaniously. (Thr.: down-left / Pitch : Up-left)
Any advice how to fix the problem ?
Next question : for TARE, must a notebook be attached by FTDI or does even BT work with smartphone to control that it is leveling ?