Page 1 of 1
Auto Landing without a mission
Posted:
Mon Sep 29, 2014 7:48 am
by fseider
Hi,
is it possible to make an auto landing, f.e in ph mode or does it only works in mission mode? It would very useful, to combined it with the RTH function.
Regards
Frank
Re: Auto Landing without a mission
Posted:
Mon Sep 29, 2014 12:11 pm
by LordPikaChu
You can kind of perform semi-auto landing by lowering your throttle stick a bit under 50%. Your copter will descend and, once it touches the ground, it should turn off motors (but not disarm). At least it worked like that in previous firmware versions (6.6).
Re: Auto Landing without a mission
Posted:
Mon Sep 29, 2014 12:39 pm
by fseider
Thanks for this Information!
Regards Frank
Re: Auto Landing without a mission
Posted:
Mon Sep 29, 2014 2:55 pm
by Kisssys
The default mission is to return to home and land. Just hit the mission position and it should return to home position and land and shut off the engines.
Re: Auto Landing without a mission
Posted:
Fri Oct 24, 2014 3:36 pm
by afernan
Un PH just lower the throttle stick a bit. It will land.