Auto Landing without a mission

Info and discussion about the original AQ v6 flight controller

Auto Landing without a mission

Postby fseider » Mon Sep 29, 2014 7:48 am

Hi,

is it possible to make an auto landing, f.e in ph mode or does it only works in mission mode? It would very useful, to combined it with the RTH function.

Regards

Frank
fseider
 
Posts: 63
Joined: Thu Aug 07, 2014 8:28 am

Re: Auto Landing without a mission

Postby LordPikaChu » Mon Sep 29, 2014 12:11 pm

You can kind of perform semi-auto landing by lowering your throttle stick a bit under 50%. Your copter will descend and, once it touches the ground, it should turn off motors (but not disarm). At least it worked like that in previous firmware versions (6.6).
LordPikaChu
 
Posts: 93
Joined: Fri Aug 09, 2013 12:42 pm
Location: Poland, Lodz

Re: Auto Landing without a mission

Postby fseider » Mon Sep 29, 2014 12:39 pm

Thanks for this Information!

Regards Frank
fseider
 
Posts: 63
Joined: Thu Aug 07, 2014 8:28 am

Re: Auto Landing without a mission

Postby Kisssys » Mon Sep 29, 2014 2:55 pm

The default mission is to return to home and land. Just hit the mission position and it should return to home position and land and shut off the engines.
Steve
Kisssys
Kisssys
 
Posts: 1340
Joined: Sat Jun 23, 2012 9:23 pm

Re: Auto Landing without a mission

Postby afernan » Fri Oct 24, 2014 3:36 pm

Un PH just lower the throttle stick a bit. It will land.
afernan
 
Posts: 1214
Joined: Sat Jul 07, 2012 5:24 pm
Location: Madrid, Spain


Return to AutoQuad 6 Flight Controller

Who is online

Users browsing this forum: No registered users and 7 guests

cron