Hi everybody,
I'm working on a quad, and I have to solve two problems, that's why I need your help.
I follow all the differents step on the wiki autoquad, but I'm facing a wall concerning the dynamic calibration, each time I want to run the calculation in step 4a, my MAE begins with a high level ( around 3) and after several loops, the numbers in the colums grow up really. I did the calibso dance and the plots seem ok..
Someone could help me to understand what's going on ?
As I was unable to have a step4a right, I stop the calibration and tried to run the quad (without the props) to get the 4 motors with my Futaba, without success. I guess it's because I haven't finish the calibration ?! Because I succed to get each motor individualy directly connected to the receiver, and when I connect all of them to the FC and connect the FC to QGC, I can see the throll pitch yaw ... moved when I move the futaba sticks. So I'm quite sure that there is not radio communication problems but just calibration problems or maybe I forget to do something between the FC and ESCs.
If someone have an idea about the step4a calibration problems, I will be gratefull.