by Trnquill » Thu Jun 06, 2013 9:43 am
Question about mounting the AQ board. It's not mentioned in the instructions anywhere, but should I use only plastic bolts and standoffs when mounting the AQ board? I usually use ordinary steel bolts but I guess they will interfere with the magnetometers on board the AQ?
The hex I'm about mount the AQ in has center frame mounting bolts sitting pretty close to AQ board, around the perimeter of the PCB, about 5-15mm under it. I was thinking that maybe adding four more ~30mm bolts for mounting the AQ board will not make a huge difference... But am I wrong?