Hi all
Another chance to play, another problem
I wanted to do some single motor tests to see if I can reduce my vibration problems, and previously using GCS 1.3.1 and DIMU firmware version 372, I just reduced the number of motors in the mixing table from 8 to 1 (the one I wanted to test), saved the settings to the volatile memory and away I went.
Since upgrading to GCS 1.4.0 and DIMU 399, doing a magnetometer calibration in the garden, and a TARE, this single motor testing now seems impossible
I reverted back to DIMU 372. Same problem.
I tried DIMU 402. Same problem.
I went back to DIMU 372 again, and tried GCS 1.3.1 (the exact setup which worked originally a few weeks ago). Same problem
Why does the AQ insist on driving all 8 motors even when the mixing table only has 1 motor listed? I've just spent the best part of an hour getting nowhere, and I'd really appreciate some help
Many thanks for any input guys David