Setup is as follows:
Spacewalk frame
- spacewalk550.jpg (4.07 KiB) Viewed 12569 times
T-Motor MT2216-11
Graupner e-Props 10x5
Flyduino SimonK 20A ESCs
P-Ion 3900mAh / P-Ion 4600mAh both with 25C
MX-20 HoTT and GR-24
FW is r397 with DIMU and native HoTT Telemetry
all powerlines are at least 4 cm from the AQ, as the AQ is 4 cm above the frame.
Total weight without battery 1250g with battery between 1520g and 1640g
Gimbal had a weight of 255g
There was an AlexMos Gimbal like the one of Jörg on his Camcruiser (
viewtopic.php?f=38&t=2920&start=70) which has been causing the inblance on pitch and is now removed.
Logfiles are now on dropbox, but I have no idea how to link them here so somebody else can see them.
https://www.dropbox.com/sh/v3e5aablupoz ... IZlcrJ31Va@Christoph,
I assume it was quickly discharged as the telemetry indicated Low Battery level 2, meaning the voltage of the battery under load was below 10.5V (3S and level2 voltage is set to 3.5V per cell).