AutoQuad 6: End of Beta

Info and discussion about the original AQ v6 flight controller

Re: AutoQuad 6: End of Beta

Postby DUKE40 » Sun Aug 10, 2014 6:43 pm

Which QGC Do You use?
I mean the version of the QGC?
On the compiled version 1.5 I use here the mentioned fields are available, but it might be that they were not in previous versions of the QGC.
I would recommend using the latest available version of the QGC.
Best regards,
Image
Spacewalk 550, MT2216-11, SimonK 20A ESC, AQ6 DIMU, 10x5" CF, SJ4000
CamCruiser, MN3510, ESC32, AQ6 DIMU, 12x4" CF, SimpleBGC, GoPro Hero 3 BE
DUKE40
 
Posts: 364
Joined: Tue Mar 26, 2013 9:49 pm

Re: AutoQuad 6: End of Beta

Postby Max » Sun Aug 10, 2014 8:37 pm

Crizz wrote:btw : connected my ESC32 to QGC and it says fw. is 1.4.5082 - i cannot change direction, no popup to select between forward and reverse. Must i first flash a new fw to the ESC ?

Yes those features require a later version of the ESC firmware. You're probably better off using the latest version anyway.

QGC will disable options which it doesn't think are available in the connected system (AQ/ESC) based on firmware version and other indicators.

-Max
Max
 
Posts: 2814
Joined: Mon Aug 13, 2012 9:45 pm
Location: Near Ithaca, NY, USA

Re: AutoQuad 6: End of Beta

Postby Crizz » Sun Aug 10, 2014 9:07 pm

okay, thx 4 reply - guss it makes most sence updating QGC and ESC-FW in the first, this might renders my problems to invalid :D
Crizz
 
Posts: 211
Joined: Sat Aug 09, 2014 3:43 pm

Re: AutoQuad 6: End of Beta

Postby Crizz » Mon Dec 22, 2014 9:04 pm

is that needed or can it be trashed ?

Roomservice, please.......!
Crizz
 
Posts: 211
Joined: Sat Aug 09, 2014 3:43 pm

Previous

Return to AutoQuad 6 Flight Controller

Who is online

Users browsing this forum: No registered users and 4 guests

cron