Autoquad + esc32 (or multistar esc) + 4822 motors

Info and discussion about the original AQ v6 flight controller

Autoquad + esc32 (or multistar esc) + 4822 motors

Postby uszy19922 » Wed Jul 10, 2013 3:57 pm

Hello Autoquad maniacs
This is my first post. I am building hexacopter on tarrot fy680 frame. I heard about tye problems with autoquad and 24poles engines. I bought multistars 4822 690kv motors. I will use esc32 or multistar 30a opto. I have both. My friend uses normal esc and it doesent works. Did you have any problems with it?
Everythink works well with kk 2.0 board...
With sincerely, Lucas.
uszy19922
 
Posts: 5
Joined: Thu Jun 06, 2013 12:34 pm

Re: Autoquad + esc32 (or multistar esc) + 4822 motors

Postby uszy19922 » Mon Jul 15, 2013 3:11 pm

Anyone?
uszy19922
 
Posts: 5
Joined: Thu Jun 06, 2013 12:34 pm

Re: Autoquad + esc32 (or multistar esc) + 4822 motors

Postby LPR » Mon Jul 15, 2013 6:14 pm

Uszy

I'm using some 50A RC Timer ESC with SimonK firmware and they work well with the AQ board.

Larry
LPR
 
Posts: 1323
Joined: Tue Jun 26, 2012 1:29 pm
Location: MN, USA

Re: Autoquad + esc32 (or multistar esc) + 4822 motors

Postby uszy19922 » Tue Jul 16, 2013 8:03 am

Which motor have you used? Problem is only with motor with a lot of poles (like 24p).
uszy19922
 
Posts: 5
Joined: Thu Jun 06, 2013 12:34 pm

Re: Autoquad + esc32 (or multistar esc) + 4822 motors

Postby bluuu » Tue Jul 16, 2013 11:09 am

Probably you must compile FW for ESC manualy with some changes (timing, delays etc) default SimonK FW have default values.
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: Autoquad + esc32 (or multistar esc) + 4822 motors

Postby LPR » Tue Jul 16, 2013 2:16 pm

Uszy

SimonK firmware has been tested on many high poll count motors and the modification he made has it working well with all motors.
I have tested the 50A opto ESC from RC Timer with many motors and all motors have worked well as long as you don't overload the motors.

Larry
LPR
 
Posts: 1323
Joined: Tue Jun 26, 2012 1:29 pm
Location: MN, USA


Return to AutoQuad 6 Flight Controller

Who is online

Users browsing this forum: No registered users and 28 guests

cron