What settings to use with MT2216-12 800kv ?

[levinemax]

Im looking for good settings for Tiger MT2216-12 800KV motor, may be someone already have it

ADVANCE = ?? Degs
MAX_CURRENT = ?? Amps
SWITCH_FREQ = ?? KHz

any ideas ?

[kinderkram]

Unfortunately the MT2216 isn't in the database yet:
http://code.google.com/p/esc32/source/b ... b.xml?r=11

Looks like you need to perfom a calibration for those.

[joebar.rc]

Hi Max,
I have the 900Kv.

Poles: 14
Advance 25 degrees
Switch 16Khz
Max current @3S 20A @4S 15A

Maybe the 800Kv can have 1-2 A more

Menno

[Lyagukh]

[levinemax]

Thanks Menno,
I'm planing to run it on 3S and 11X 5 or 5.5 props, I'll start with this settings.

I'm going to run calibration as soon as I get the props here and I'm still waiting for one motor
I'll post the results for the database.

Thanks

[Lyagukh]

[levinemax]

Quick question, Is it enough to run calibration on one motor and then copy the data to other ESC's ?
Or I need to run it on one CW and on one CCW prop or do it for each motor ?

[joebar.rc]

Hi max

Only one will do , I dont make a difference in cw or ccw either