Hi, all.
Previously, I'm able to connect to the AQ ECU and change RPM with the interface using an FTDI.
But now, It can't work.
Connection with AQ ECU and ESC32v3 seem to be good.
But, motor doesn't work.
When I start calibration, text is displayed as follows.
Setting temporary MAX_CURRENT to 0
Checking ESC status...
Arming...
Starting...
Stabilizing RPM...
Setting DUTY = 4%
ESC reports not running, aborting.
ESC error detected!
Aborting calibration...
Stopping...
Stopped.
Resetting MAX_CURRENT to 1.3
Motor can run another way.
So, motor doesn't brake.
Is ESC32 broken?
Please need your help i do not understand the problem here.