Page 1 of 1

Motor Startup with Tiger MN3510 / CF15"x5"

PostPosted: Wed Oct 05, 2016 5:02 pm
by Snoopy
I'm having some trouble with consistent startup of this motor/prop combination. Already increased START_VOLTAGE/START_ALIGN_VOLTAGE and ADVANCE and reduced SWITCH_FREQUENCY, but nothing really works reliably. This surprises me because the combo seems not to be particularly exotic. At least it is one of the recommended setups for Tilman's TAMARA.

Is somebody running this combo willing to share his configuration parameters?

Best regards,
Stefan