unable to write parameters to ESC32v2

Info and Discussion about the ESC32 hardware and software

unable to write parameters to ESC32v2

Postby Snoopy » Mon Oct 03, 2016 10:58 am

All,

when modifying parameters like STARTUP_VOLTAGE under the "ESC32v2 Settings" tab and trying to write them to ESC memory by pressing "Send to ESC" I get the message: "No changed Params." and nothing is written. Apart from that, communication seems to be o.k. I can Arm, Start Motors, etc. Are there any known issues? Using the search function I didn't find anything suitable.

I'm using "QGroundControl AQ Win32 v1.7.B3" under "Windows Vista". Any ideas?

Regards,
Snoopy
Snoopy
 
Posts: 5
Joined: Thu Sep 08, 2016 11:00 am

Re: unable to write parameters to ESC32v2

Postby JussiH » Mon Oct 03, 2016 5:20 pm

You need to use putty or the ESC32 GUI. But since ESC32 GUI is payware for ESC32v2, your best bet is Putty.
JussiH
 
Posts: 2103
Joined: Thu Jun 21, 2012 9:25 pm

Re: unable to write parameters to ESC32v2

Postby Snoopy » Tue Oct 04, 2016 4:16 pm

That worked! Thanks for your help.

Snoopy
Snoopy
 
Posts: 5
Joined: Thu Sep 08, 2016 11:00 am


Return to ESC32

Who is online

Users browsing this forum: No registered users and 16 guests

cron