esc 32 v3- Available now @ iRC

Info and Discussion about the ESC32 hardware and software

Re: esc 32 v3- Available now @ iRC

Postby afernan » Sun Aug 28, 2016 7:15 pm

Jussi:
I got the last one.
When do you expect a new lot?
Angel
afernan
 
Posts: 1214
Joined: Sat Jul 07, 2012 5:24 pm
Location: Madrid, Spain

Re: esc 32 v3- Available now @ iRC

Postby JussiH » Mon Aug 29, 2016 8:55 am

Honestly, I dont know....I am pushing iRC to make more, but so far out of more than 300 ordered, only 130 has been delivered.

I am at the point where I have lost faith in iRC and I dont think they are up to the task. I am looking into alternatives...
JussiH
 
Posts: 2103
Joined: Thu Jun 21, 2012 9:25 pm

Re: esc 32 v3- Available now @ iRC

Postby JussiH » Thu Oct 13, 2016 11:14 am

We now have ESC32v3 available at Viacopter. Limited quantity, get them while they are available...;-)

https://viacopter.eu/multirotor-shop/es ... pter-store
JussiH
 
Posts: 2103
Joined: Thu Jun 21, 2012 9:25 pm

Re: esc 32 v3- Available now @ iRC

Postby Picare » Sun Nov 06, 2016 7:47 pm

Does anyone have the same problem than me?

Vbat jumper soldered, or not, or the other, I have to power the logical part with the 5v of usb.

Now, the current reading are Strange: between 0 and -0.5 A in forward or reverse direction of the motor, at min or maximum speed and with load or no load.

Impossible to use it without a 5V BEC, and impossible to limit the current to 10A...

I have the black version purchased in october :(
Picare
 
Posts: 3
Joined: Sun Nov 06, 2016 10:08 am

Re: esc 32 v3- Available now @ iRC

Postby shung » Thu Nov 10, 2016 7:16 pm

Hello there! When will there be another production of these ESCs available?
shung
 
Posts: 2
Joined: Thu Nov 10, 2016 7:12 pm

Re: esc 32 v3- Available now @ iRC

Postby JussiH » Fri Nov 11, 2016 8:31 am

I have just added some more to the shop. I dont know when the next batch will be made, but I hope that its soon...;-)

https://viacopter.eu/multirotor-shop/es ... pter-store
JussiH
 
Posts: 2103
Joined: Thu Jun 21, 2012 9:25 pm

Previous

Return to ESC32

Who is online

Users browsing this forum: No registered users and 7 guests

cron