ESC32v3 Batch2

Info and Discussion about the ESC32 hardware and software

Re: ESC32v3 Batch2

Postby r0sewhite » Sun May 01, 2016 10:52 pm

Got the first samples last week. The ESCs come packed in blister boxes with card backs. Inside is a little paper explaining the pads and showing important sizes.

Since I've got to build 25 copters for the University of Augsburg now, I've designed a small ESC mounting for the Rachel frame. The caps will later be fixed on the little arm of the mounting with a piece of heat shrink tube. And yes, the ESCs are upside down. I decided to rather have a clean wiring with the motor cables going undereath the ESC straight to the solderig pads than to have the LEDs on the top side. If necessairy, one can the the LEDs anyway.

Image

Image

Image

Image

Image
r0sewhite
 
Posts: 113
Joined: Tue Oct 16, 2012 12:08 am

Re: ESC32v3 Batch2

Postby whizz101 » Mon May 02, 2016 10:32 am

Wow, they look great. Such a clean build! Might have to build one of these for myself!

It would be great if you could offer a kit to build one of these with all the parts and files to fly it in quatos config!
whizz101
 
Posts: 82
Joined: Thu Oct 16, 2014 9:00 pm

Re: ESC32v3 Batch2

Postby JussiH » Tue Jul 05, 2016 6:29 pm

ESC32v3 is now available at Viacopter. Limited Quantity:D

https://viacopter.eu/multirotor-shop/es ... pter-store
JussiH
 
Posts: 2103
Joined: Thu Jun 21, 2012 9:25 pm

Previous

Return to ESC32

Who is online

Users browsing this forum: No registered users and 2 guests