ESC32v3 USB problem -> Error 43 -> USB device not recognized

[Fabiano1994]

Hello

I tried to connect the ESC32 v3 at three different PCs with Win10 or Win7. The drivers and the ECU are installed correctly.
At 9 of 10 tries, windows will get me an error 43:
Have anyone a solution for this problem?

Thank you for any answer.

Kind regards
Fabiano1994.

[Manu]

Sometimes I have this issue. If I wait about 30s it then find it again and end up by work properly although it may be recognized as Teensy.

[kinderkram]

Fabiano, try this: uninstall the STM driver in the device manager. Plug in the ESC and wait...
If it doesn´t install the driver again unplug the ESC, install the driver v1.4 and plug in the ESC once more.

As Manu mentioned it might take a while until the correct device is detected.