Hi
I would like some more info about this feature. I'm building a robot with BL gimbal motors. The motors are also going to act as wheels. Does the servo mode allow for constant rotation?
Thanks!
ESC32 V3 Servo mode?
5 posts
• Page 1 of 1
ESC32 V3 Servo mode?
by Georgseema » Tue Aug 25, 2015 12:04 pm
- Georgseema
- Posts: 10
- Joined: Sat Jun 27, 2015 5:08 pm
Re: ESC32 V3 Servo mode?
by kinderkram » Tue Aug 25, 2015 1:23 pm
Hi Georg,
here´s more info about the Servo Mode (only works with BL gimbal motors):
http://autoquad.org/wiki/wiki/aq-esc32/ ... Servo-Mode
here´s more info about the Servo Mode (only works with BL gimbal motors):
http://autoquad.org/wiki/wiki/aq-esc32/ ... Servo-Mode
- kinderkram
- Posts: 2911
- Joined: Fri Jun 22, 2012 7:47 am
Re: ESC32 V3 Servo mode?
by Georgseema » Tue Aug 25, 2015 11:08 pm
- Georgseema
- Posts: 10
- Joined: Sat Jun 27, 2015 5:08 pm
Re: ESC32 V3 Servo mode?
by Georgseema » Sat Nov 14, 2015 8:17 am
Hi
This question is still up in the air. Can ESC32 servo mode allow for continous rotation?
Like this thing:
This question is still up in the air. Can ESC32 servo mode allow for continous rotation?
Like this thing:
- Georgseema
- Posts: 10
- Joined: Sat Jun 27, 2015 5:08 pm
Re: ESC32 V3 Servo mode?
by bn999 » Sat Nov 14, 2015 2:43 pm
Although it was not designed for continuous rotation, you can specify input angles > +-360 deg. For instance, if you entered -720 deg, it would turn in reverse for 2 rotations. Then enter +3600 and it would turn forward 12 complete rotations.
- bn999
- Posts: 1559
- Joined: Thu Jun 21, 2012 11:40 pm
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 7 guests