Page 1 of 1

calibration Tiger motor MN3110 700Kv with T-motor 12x4

PostPosted: Wed Apr 29, 2015 12:32 pm
by leopold1
Hi,

I'm looking for a cal file from a T-motor MN3110 700Kv with T-motor carbon prop 12x4.
Thanks for sharing.

If not available, what would be the best starting parameters?

Vincent

Re: calibration Tiger motor MN3110 700Kv with T-motor 12x4

PostPosted: Thu Apr 30, 2015 2:14 am
by aBUGSworstnightmare
viewtopic.php?f=25&t=3070#p20346

Should be there.
Joerg

P.s. please check if it's for 700KV. Not quite sure which one Angel is using.

Re: calibration Tiger motor MN3110 700Kv with T-motor 12x4

PostPosted: Thu Apr 30, 2015 2:02 pm
by leopold1
Thx, and yes they are 700KV.