calibration Tiger motor MN3110 700Kv with T-motor 12x4

Info and Discussion about the ESC32 hardware and software

calibration Tiger motor MN3110 700Kv with T-motor 12x4

Postby leopold1 » Wed Apr 29, 2015 12:32 pm

Hi,

I'm looking for a cal file from a T-motor MN3110 700Kv with T-motor carbon prop 12x4.
Thanks for sharing.

If not available, what would be the best starting parameters?

Vincent
leopold1
 
Posts: 311
Joined: Tue Jul 31, 2012 11:43 pm
Location: Belgium

Re: calibration Tiger motor MN3110 700Kv with T-motor 12x4

Postby aBUGSworstnightmare » Thu Apr 30, 2015 2:14 am

viewtopic.php?f=25&t=3070#p20346

Should be there.
Joerg

P.s. please check if it's for 700KV. Not quite sure which one Angel is using.
aBUGSworstnightmare
 
Posts: 1460
Joined: Fri Jun 22, 2012 5:24 pm

Re: calibration Tiger motor MN3110 700Kv with T-motor 12x4

Postby leopold1 » Thu Apr 30, 2015 2:02 pm

Thx, and yes they are 700KV.
leopold1
 
Posts: 311
Joined: Tue Jul 31, 2012 11:43 pm
Location: Belgium


Return to ESC32

Who is online

Users browsing this forum: No registered users and 11 guests