by Flyduino_Paul » Fri Jul 06, 2012 8:31 pm
Can only comment that basically there is no problem with ESC32 and MT3506, didnt tried the CL callibration till now but a quick setup on the testbench showed a good result,i guess the failure is in the soft, Peter tested only with small Motors so far.
I am also wondering a bit for the SimonK, we have a copter with 3506 and SimonK TGY ESC, works, how did this combination behaved for you,would be nice if you can describe the failure a bit more, mean its was only a quick build, we didnt tuned it till perfection, but it flew.
I cant say there where any timing problems, those can be heard easily as far i know.
If Peter or Menno wants i can send a 3506 to them, but dont know if they have time for it now.
Motor bigger then 28XX are harder to drive we are aware of this, as the Hobbywing Fw doesnt work with Motors above 28XX, at least the versions we know.