Hi all!
When calibrating the ESC32 for Current Limiter and RPM2Voltage, i found a small issue.
With "minthrottle" and "motor start" at default values, everything works fine after tuning the settings. But when i rise "minthrottle" to 1100 and "motor start" to 1150 (for my Graupner Radio), it doesn't work. (Motor does not start)
I thought qgroundcontrol would send values to the ESC32 regardless of the PWM settings,...
Used qgroundcontrol 1.5 for Windows.
Any ideas?
Best regards,
Yannick