Calibration with qgroundcontrol (RPM/CLimiter) depends on..

Info and Discussion about the ESC32 hardware and software

Calibration with qgroundcontrol (RPM/CLimiter) depends on..

Postby Yups » Tue Sep 23, 2014 9:21 pm

Hi all!

When calibrating the ESC32 for Current Limiter and RPM2Voltage, i found a small issue.

With "minthrottle" and "motor start" at default values, everything works fine after tuning the settings. But when i rise "minthrottle" to 1100 and "motor start" to 1150 (for my Graupner Radio), it doesn't work. (Motor does not start)

I thought qgroundcontrol would send values to the ESC32 regardless of the PWM settings,...

Used qgroundcontrol 1.5 for Windows.

Any ideas?

Best regards,
Yannick
Yups
 
Posts: 25
Joined: Sat Dec 08, 2012 3:27 pm

Return to ESC32

Who is online

Users browsing this forum: No registered users and 16 guests

cron