Flashing stopped and ESC not responding anymore

Info and Discussion about the ESC32 hardware and software

Flashing stopped and ESC not responding anymore (SOLVED)

Postby DUKE40 » Tue Sep 16, 2014 4:53 pm

Finally checking again all connections, I had a cold solder on RX.
After I had corrected this and soldered it again, I was able to flash it again and now everything seems to be fine again.
Will put it into my quad and see if everything is working as expected.

Thanks to everybody for the help, hints and advises.

Everything is working, I just made a short test in my garden, no flight, just checking the rotation of all motors and that it reacts correctly to stick input.
Tare is done, next I will do the onboard magnetic calibration.
And then I will have to calibrate my AlexMos Gimbal and the maiden flight will be one step away.
Best regards,
Spacewalk 550, MT2216-11, SimonK 20A ESC, AQ6 DIMU, 10x5" CF, SJ4000
CamCruiser, MN3510, ESC32, AQ6 DIMU, 12x4" CF, SimpleBGC, GoPro Hero 3 BE
Posts: 364
Joined: Tue Mar 26, 2013 9:49 pm

Re: Flashing stopped and ESC not responding anymore

Postby JussiH » Tue Sep 16, 2014 7:13 pm

Good to hear!
Posts: 2103
Joined: Thu Jun 21, 2012 9:25 pm


Return to ESC32

Who is online

Users browsing this forum: No registered users and 1 guest