Hello everybody, I'm new on this forum.
I received my first ESC32 a few days ago, just took one for testing.
I was planning to use it with 5S battery, Sunnysky 3508-380kv motors and 15x5.5 carbon fiber props.
I loaded FF and CL terms from esc32_motor_db.xml, motor model="MN3508-29", prop model="RCT 15x5.5cf" and enabled closed loop mode.
It runned pretty well, probably better than any other ESC I've ever tried, but I wanted more, and decided to try enabling FET_BRAKING.
I was very happy on how it was running, but after about 30 seconds of throttle movement magic smoke came out. I pulled the battery as fast as I could.
High side FET on channel C has completely burnt, also low side FET has been damaged, but is less visible, other components seems fine.
Any idea on why this happened?
I'm going to replace those FET's, what can I do to prevent this from happening again?
I'd really like to keep braking enabled...