Page 5 of 5
Re: ESC32 with T-Motor U8-Pro
Posted:
Sun Jun 28, 2015 4:30 pmby TheBone
Re: ESC32 with T-Motor U8-Pro
Posted:
Sun Jun 28, 2015 5:07 pmby LPR
To have the best control with your Tx you need to have the RC values go from 0 to 1400 or from -700 to 700.
You can do this by adjusting the radio channels in your Tx. Look for a video on youtube for your Tx if you don't know how to limit the range of your Tx channels.
Larry
Re: ESC32 with T-Motor U8-Pro
Posted:
Sun Jun 28, 2015 8:31 pmby TheBone
Re: ESC32 with T-Motor U8-Pro
Posted:
Sun Jun 28, 2015 9:56 pmby LPR
Chris
Does the AQ flight controller arm?
Larry
Re: ESC32 with T-Motor U8-Pro
Posted:
Sun Jun 28, 2015 11:38 pmby TheBone
Yes, the M4 arms.
Okay, found the failure. In German we would say failure 40. ^^
I interrupted the CAN wire to the N4 board. After I replaced it I got wonderful results, also due to the new configured radio.