AfroI2C + ESC32 heads-up

Info and Discussion about the ESC32 hardware and software

AfroI2C + ESC32 heads-up

Postby Para » Sat Apr 12, 2014 7:00 pm

The ESC32 wouldn't arm when connected to AfroI2C with valid I2C signal (from MK FC), unless one connects on the Afro serial port and sets pulse start-time a bit under the default 1000. 990 will do OK.
Para
 
Posts: 4
Joined: Thu Mar 27, 2014 1:32 pm

Return to ESC32

Who is online

Users browsing this forum: No registered users and 2 guests

cron