I went through a lot of trouble with this 22-pole high-kV motor. On Simonk ESCs I've had a lot of desyncs, and I've burned a couple of BLHeli ESCs testing. So I decided to take a peek at ESC32 tech. It would still desync with Advance lower then 17, and I still have to play with Blanking and Switch Freq to see if behaviour changes, but it performs smoothly with the following params.
Today's prop was a 12x5.5 CF.
Multistar 4822-690kV ESC32-autotune
2 posts
• Page 1 of 1
Multistar 4822-690kV ESC32-autotune
by Para » Fri Mar 28, 2014 6:25 pm
- Attachments
-
690kv_t2_ff_cl.txt- (910 Bytes) Downloaded 633 times
- Para
- Posts: 4
- Joined: Thu Mar 27, 2014 1:32 pm
Re: Multistar 4822-690kV ESC32-autotune
by kinderkram » Fri Mar 28, 2014 6:42 pm
Hi Para,
welcome to AQ!
Thx for sharing your experiences.
Norbert
welcome to AQ!
Thx for sharing your experiences.
Norbert
- kinderkram
- Posts: 2911
- Joined: Fri Jun 22, 2012 7:47 am
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 10 guests