I was wondering if someone could help me program my ESC32.
I don't have an FTDI, it is due here in 2 weeks but was trying to use my Arduino Nano as an FTDI. I took the Arduinos 5V, GRD, TX, and RX and connected to ESC 32 with TX and RX inverses.
I loaded the Arduino Nano example sketch "ArduinoISP" and set the the programmer in tools as "Arduiono As ISP"
I see the port when I start qgroundcontrol and it sees the arduino port but when I try to flash the ESC32 I get a fail. I did it with the boot pins and without.
Is the LED supposed to be off when it is in boot mode? Do I need to load a boot loader or is that part of the Atmel?